신품 탱커 세미 트레일러 Mas Trailer Tanker 2023 STAİNLESS STEEL MEDIUM MODEL
광고에 관심이 있으십니까?
1/28
€60,000
총 가격, 부가가치세 – 18%
≈ US$65,060
≈ ₩88,290,000
≈ ₩88,290,000
€50,847.46
출고가
브랜드:
Mas Trailer Tanker
모델:
2023 STAİNLESS STEEL MEDIUM MODEL
형식:
탱커 세미 트레일러
체적:
30000 l
적재 용량:
25500 kg
순중량:
7500 kg
총중량:
33000 kg
위치:
터키 KARATAY / KONYA
게재 날짜:
2024. 4. 28.
Autoline ID:
BZ35996
설명
제5륜 높이:
1250 mm
전체 치수:
10850 m × 2550 m × 3750 m
트럭 차체
섀시:
강철
공구함:
스페어 휠 홀더:
탱크 트레일러
스테인리스강:
형식 – 304
주입구 수:
1
테스트 압력:
0.4 바
구획 수:
1
측벽 두께:
4 mm
종단벽 두께:
4 mm
격벽 두께:
4 mm
차축
차축 수:
3
서스펜션:
에어/에어
휠베이스:
1310 mm
타이어 사이즈:
385/65/R22.5
브레이크:
드럼
브레이크
EBS:
상태
상태:
신품
보증::
1년
배송이 필요하십니까?
배송 비용 계산
문서
추가 정보
컬러:
화이트
중요
이 오퍼는 단지 안내용입니다. 더 정확한 정보는 판매자에게 요청하십시오.
구매 정보
DIMENSIONS:
Length: 10850 mm
Width: 2550 mm maximum
Height 3750 mm
Pin - Ground clearance: 1250 mm
CHASSIS AND STRUCTURE:
Chassis: Carbon steel 100x200x5mm box section
Tanker Structure Monoblock
1 & 3 Compartments
Tank capacity between 30.000 lt & 36.000 lt
4mm chrome stainless steel sheet
Axles
3 local axles, each with a carrying capacity of 12 tons, are used.
It has air suspension.
The front axle is lifted and can be controlled from the driver's cabin.
BRAKE SYSTEM:
Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed.
ELECTRICAL SYSTEM
Saba brand
2x7 pin sockets - 24V, lights according to SAE standards.
Rear lights, side marker lights, brake safety warning lights and signal lights are installed.
There will be 2 tail and stop combination lights.
2 turn signal combination lamps will be installed.
1 license plate light.
The electrical system complies with European standards and is flame retardant.
PARKING LEGS
OMS brand parking legs
Including telescopic mechanical conveyor
Dynamic lifting capacity : 25 tons
Static lifting capacity : 50 tons
Low gear position : 0.98 mm / RPM
TIRES AND RIMS:
385/65/R22.5 STARMAX PETLAS, (6 pieces)
11.75 x 22.5, JANTSA rim (6 pcs)
KING-PIN:
Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate.
PAINT:
Since chrome tankers have stainless steel sheet, they do not require painting, but if painting is desired, the following processes are carried out respectively
All parts are carefully cleaned before painting.
An initial protective primer is applied and epoxy is used for the coating.
Two coats of high quality paint are applied to the tanker.
The tanker is painted white. It can be painted in any desired color. If other color is requested, it will be reflected as extra cost.
KURTUBA manhole cover:
The lower plate (stainless chrome) is welded to the upper part of the tanker and mounted on the tanker. The upper plate is connected to the throat plate with sealed gaskets and screws. Mushroom type vents are mounted on them.
KURTUBA Valve :
3" flanged ball valve is made of chrome stainless material and protected against corrosion. The ball is plastered with stainless material. Liquid and heat resistant Teflon material is used in sealing parts.
ACCESSORIES
6 pieces of mudguards
1 wheel chock
1 6 kg fire extinguisher box
1 spare wheel space
1 water tank 30 lt.
1 Folding ladder
Holder for two 3.5 m drain hoses
Note: Please contact us for your production requests in special sizes.
DIMENSIONS:
Length: 10850 mm
Width: 2550 mm maximum
Height 3750 mm
Pin - Ground clearance: 1250 mm
CHASSIS AND STRUCTURE:
Chassis: Carbon steel 100x200x5mm box section
Tanker Structure Monoblock
1 & 3 Compartments
Tank capacity between 30.000 lt & 36.000 lt
4mm chrome stainless steel sheet
Axles
3 local axles, each with a carrying capacity of 12 tons, are used.
It has air suspension.
The front axle is lifted and can be controlled from the driver's cabin.
BRAKE SYSTEM:
Knor or Wabco products are used in the braking system designed according to European regulations. It is equipped with automatic brake ratchets, brake valve, brake bellows (30 cylinders), brake pads (394x200), axle brakes (4 sensors 2 modules EBS system). There are 2 interchangeable and protected brake sockets in front of the trailer. 60+60 lt capacity air tank is installed.
ELECTRICAL SYSTEM
Saba brand
2x7 pin sockets - 24V, lights according to SAE standards.
Rear lights, side marker lights, brake safety warning lights and signal lights are installed.
There will be 2 tail and stop combination lights.
2 turn signal combination lamps will be installed.
1 license plate light.
The electrical system complies with European standards and is flame retardant.
PARKING LEGS
OMS brand parking legs
Including telescopic mechanical conveyor
Dynamic lifting capacity : 25 tons
Static lifting capacity : 50 tons
Low gear position : 0.98 mm / RPM
TIRES AND RIMS:
385/65/R22.5 STARMAX PETLAS, (6 pieces)
11.75 x 22.5, JANTSA rim (6 pcs)
KING-PIN:
Turkish brand OMS is used. It is a 74080 standard bottom removable king pin and is made according to SAE standards as 8 bolt type. It has E certificate.
PAINT:
Since chrome tankers have stainless steel sheet, they do not require painting, but if painting is desired, the following processes are carried out respectively
All parts are carefully cleaned before painting.
An initial protective primer is applied and epoxy is used for the coating.
Two coats of high quality paint are applied to the tanker.
The tanker is painted white. It can be painted in any desired color. If other color is requested, it will be reflected as extra cost.
KURTUBA manhole cover:
The lower plate (stainless chrome) is welded to the upper part of the tanker and mounted on the tanker. The upper plate is connected to the throat plate with sealed gaskets and screws. Mushroom type vents are mounted on them.
KURTUBA Valve :
3" flanged ball valve is made of chrome stainless material and protected against corrosion. The ball is plastered with stainless material. Liquid and heat resistant Teflon material is used in sealing parts.
ACCESSORIES
6 pieces of mudguards
1 wheel chock
1 6 kg fire extinguisher box
1 spare wheel space
1 water tank 30 lt.
1 Folding ladder
Holder for two 3.5 m drain hoses
Note: Please contact us for your production requests in special sizes.