신품 플랫폼 세미 트레일러 Fliegl 3-Achs Plateau SDS 380 Spezial Mega-Z

Description: Open semitrailer
Functionality: fully functional
Location: Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland
Axles + Suspension: SAF/BPW drum brake axles, at the manufacturer's choice, air suspension, 1st axle automatic lift axle, additionally electrically operable from the truck, including forced lowering and starting aid
Braking System: 2-line pneumatic braking system, color-coded line routing for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, EBS, electronic braking system with EBS socket at the front, without connection cable, with raising & lowering valve with quick vent, holding function in lowered position + auto-reset function, vehicle stability system, axle load recognition via EBS-CAN bus signal
Wheels and Tires: 235 / 75 R 17.5", manufacturer's choice, steel rims in twin arrangement
Electrical System: 24 volts, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear in LED, 2 x 7-pole and 1 x 15-pole tamper-proof sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, double LED illuminated and
axle configuration: 3 axles
colour: silver
available in multiple units
Fine-grained steel welded construction
kingpin plate with replaceable 2" kingpin
additional splash guard riveted to the underside as a sheet of metal
in the neck area above the rear axle of the semi-trailer and above the wheels on the vehicle
frame in reinforced design for vehicle loads up to the outer frame
outer frame with "Load-Lock profile" approximately every 400 mm for securing lashing straps
10 pairs of lashing rings embedded in the top/outside of the outer frame
each rated at 10 tons
24 tons. Two-stage support winch
single-side operation
with semi-circular lower part and straight connecting plate
with stroke compensation
folding rear support
support wedges with holder
aluminum side impact protection
steel under-ride protection
quarter panel fenders in front of and behind each axle
with additional sheet metal splash guard above the wheels
with anti-spray flaps according to EC regulations
1 plastic toolbox
w=600 / h=425 / d=460 mm
lockable
container locking system
4 pairs of locking recesses embedded in the floor for 2 x 20 ft or 1 x 40 ft containers
4 pairs of container locking adapters
(additional transverse support required at the front and rear of the container
the container must rest evenly over its width in conjunction with the locks
transverse supports are not included in the scope of delivery)
attachment rail for loading ramps at the rear extension over the entire width
rear extension mechanical
with hand crank
extendable by approximately 1,500 mm
lockable every 500 mm
including under-ride protection with lighting that can be extended
in the wheel well area with Lohr sheet metal
center with steel diamond plate
storage space for loading ramps integrated in the rear extension
usable only when the rear extension is extended by approximately 1000 mm
for transporting the ramps with the rear extension retracted - storage space for ramps in the FR
located to the right in front of the axles
1 pair of ramps
3,000 mm long
300 mm wide
load-bearing capacity per pair 6,000 kg
electric cable winch
24 volts
pulling force approximately 8165 kg
mounted centrally at the very front
operated with a wireless remote control
cable length 35 m x approximately 10 mm
with roller cable guide and removable guide rollers
Bjddhw Toza Aiyezbodg