캠핑카 MAN D2862LE476용 기어박스 ZF 3055 marine unused 3101003031
광고에 관심이 있으십니까?
1/2
형식:
기어박스
부품 번호:
ZF3055
원본의 카탈로그 번호:
3101003031
예비 부품 유형:
순정 예비 부품
제조년도:
2015-01
위치:
오스트리아
Hörsching7279 km to "United States/Columbus"
Hörsching7279 km to "United States/Columbus"
판매자 재고 ID:
ZF3055
게재 날짜:
1개월 초과
중요
이 오퍼는 단지 안내용입니다. 더 정확한 정보는 판매자에게 요청하십시오.
구매 정보
안전 정보
판매자 검증
저렴한 가격에 장비를 구매하기로 결정했다면, 진짜 판매자와 연락을 취하고 있는지 확인하십시오. 장비 소유자에 대한 정보를 최대한 많이 알아내십시오. 사기 방법 중 하나는 자신이 실제 회사인 것처럼 가장하는 것도 있습니다. 의심이 든다면, 당사가 추가적인 규제를 할 수 있도록 피드백 양식을 통해 이에 대해 알려주십시오.
가격 확인
구매를 결정하기 전에, 몇 가지 판매 오퍼를 자세히 검토하여 선택한 장비의 평균 가격을 파악하십시오. 마음에 드는 오퍼의 가격이 유사한 매물보다 훨씬 더 저렴하다면 다시 생각해보십시오. 가격 차이가 확연히 클 경우, 숨겨진 결함이 있거나 판매자가 사기 행위를 시도하는 것일 수 있습니다.
유사한 장비의 평균 가격과 너무 가격 차이가 심한 제품은 구매하지 마십시오.
수상한 약속이나 선불 상품에 동의하지 마십시오. 의심스럽다면, 주저하지 말고 세부 정보를 명확히 밝히거나, 장비의 추가 사진 및 서류를 요구하거나, 문서의 진본성을 확인하거나, 기타 질문을 하십시오.
의심스러운 선불 요구
가장 흔한 사기 유형입니다. 불공정한 판매자가 장비 구매 권리를 "예약"해야 한다는 명목으로 일정액의 선금을 요구할 수 있습니다. 그 다음, 사기꾼이 거액을 편취하고 사라져서 더 이상 연락이 되지 않을 수 있습니다.
이 사기 수법에는 다음과 같은 다양한 유형이 있습니다.
- 카드에 선금 이체
- 연락 도중 판매자가 의심스럽다면, 자금 이체 절차를 확인하는 서류 없이 선금을 지급하지 마십시오.
- "신탁" 계좌에 이체
- 이러한 요청이 있다면 주의해야 하며, 아마도 대개는 사기꾼일 확률이 높습니다.
- 유사한 이름의 회사 계정으로 이체
- 주의하십시오. 사기꾼들은 이름을 살짝만 바꿔 잘 알려진 회사로 가장하곤 합니다. 회사 이름이 미심쩍다면 자금을 이체하지 마십시오.
- 실제 회사의 청구서에 신원 정보만 대체
- 이체를 실행하기 전에, 제시된 정보가 올바르며, 지정한 회사와 일치하는지 여부를 확인하십시오.
사기를 발견하셨습니까?
저희에게 알려주십시오
판매자 연락처
ETC EUROPE TRUCK FINLAND OY
오스트리아
Autoline 활동 기간 10년
+358 50 53...
표시
+358 50 5345498
+358 9 231...
표시
+358 9 23165797
기계류나 차량을 판매하고 계십니까?
저희와 함께라면 가능합니다!
유사한 광고
가격은 요청 시 공개
기어박스
ZF3055 for MAN D2862LE496 V12-2000HP
오스트리아, Hörsching
ETC EUROPE TRUCK FINLAND OY
Autoline 활동 기간 10년
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------
direct drive
PART LIST: 3101003031 RATIO: 2.500:1A
unused new,surplus 0 hours.
ZF3055
stock available , subject to prior sale.
------------------------------
other marine transmissions available by the request
ZF 2560
PART LIST: 3082012055 RATIO: 4.133:1A
PART LIST: 3082012055 RATIO: 4.133:1A
ZF 3055
PART LIST: 3101003031 RATIO: 2.500:1A
PART LIST: 3101003031 RATIO: 2.500:1A
ZF 3060 V
PART LIST: 3101026059 RATIO: 2.520:1A
PART LIST: 3101026059 RATIO: 2.520:1A
ZF 3070
PART LIST: 3101078059 RATIO: 2.773:1A
ZF W7500
PART LIST: 3084020045 RATIO: 5.533:1A
PART LIST: 3084020045 RATIO: 5.533:1A
------------------------------------------------------------------
available auxiliary equipment:
• N. 2 Propeller axles 5370 mm complete with locking rings and crown nuts
• N.. 2 coupling flanges in C45 axis 0100 complete with fixing screws
• N.. 2 external rudders tubes to the hull l. 2100 mm in 6082 T6 aluminum
• N. 2 Internal tubes - Bushing holder 0150 thickness 12.5 length 2285 mm in AISI 316 complete with
hydrolubricated bushings with attachment for mechanical seal
• N.. 2 Microterm MTM908 mechanical seals for 0100 axis complete with Pneumostop
• N. 2 Propellers shaft support in Nibral 0 axis 100 h 715 mm insulating plate and counterplate
• N. 2 rudders holes to be welded in aluminum 6082 T6 0 ext. 140 th.30 with welded flanges
• N. 2 Lower bushings for rudder bushings in PR18 100x70 h 160mm to be installed on site
• N. 2 Upper bushings for rudder bushings in PR18 100x70 h 100 mm to be installed on site
• N. 2 Boxed rudders in TS70660/39 steel with ring nut and counter-ring nut, sacrificial zincs
• N .1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 1 double rudder arm in OTS BTD60-150-232 complete with pins and bolts
• N. 2 Zincs for propeller nut 0 200
• N. 1 AISI 304 0 71 mm rudder connection bar, length 3200 mm, complete with articulated ends
• N. 1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 right with 1:10 finish class S
- Balancing ISO 1940-1:2003 G 2.5
• N.1 Propeller in Nibral 5 blades MV14 diameter 01050X 1650 hole 0100 left with 1:10 finish class S -
Balancing ISO 1940-1:2003 G 2.5
______________________________________________
zf 2560
part list: 3082012055 ratio: 4.133:1a
part list: 3082012055 ratio: 4.133:1a
zf 3055
part list: 3101003031 ratio: 2.500:1a
part list: 3101003031 ratio: 2.500:1a
zf 3060 v
part list: 3101026059 ratio: 2.520:1a
part list: 3101026059 ratio: 2.520:1a
zf 3070
part list: 3101078059 ratio: 2.773:1a
zf w7500
part list: 3084020045 ratio: 5.533:1a
part list: 3084020045 ratio: 5.533:1a
---------------------------------------------------------